Categories
Cars (182)
Aircraft (193)
Boats (21)
Rockets (64)
Radios (1094)
Batteries (519)
Chargers (156)
Accessories (2791)
New Items (3597)
Support
Brands
Arrma (2178)
Axial (1125)
Belair (23)
Black Magic (2)
Blade (924)
Castle Creations (279)
Duratrax (37)
Dynamite (207)
ECX (205)
E-flite (2205)
Estes (69)
Evolution Engines (4)
Fusion (76)
Gens Ace (154)
Hangar 9 (628)
HobbyZone (181)
Horizon (7)
K&S (83)
Logic Glue (18)
Logic RC (169)
Losi (1902)
Parkzone (5)
Pro Boat (331)
ProEdge (19)
Pro-line Racing (638)
Protoform (56)
Radio Active (868)
RC Overhaul (275)
RealFlight (4)
Spektrum (905)
Staufenbiel (1)
Storm Batteries (9)
TLR (1032)
Vaterra (3)


SRP: £36.50
SMAP:
Trade: Barcode:
0819326013256
0819326013256
Overview
Castle Link V4 is our new 32-bit based USB adapter.
Note: Compatible with Cobra 8 ESC only and uses the new Castle Link 2 Windows software.
In The Box
- Castle Link V4 adapter
- Type C USB cable
- Castle Decal sheet
Program your Cobra 8 ESC on your Windows PC (10 or higher) with the Castle Link V4 USB programming kit.
- Set up of programmable options with point and click ease
- View your current program settings
- Download and view the ESC's onboard data logs
- Update ESCs with new firmware (if available)
Set-up instructions:
- Download the Castle Link 2 software from the Castle Creations Downloads area.
- Run the Castle Link 2 installer and follow on-screen prompts.
- Plug the Castle Link V4 adapter into the provided Type-C USB cable.
- Connect the ESC's receiver lead to the Castle Link adapters prongs; the brown wire connects to the pin marked "GND" or "-".
- Note: Castle Link Classic program is not compatible with the Castle Link V4 adapter and Cobra 8 ESC
Support