0660132683542
Product Details
The Hangar 9® Viper 100N Turbine Jet ARF delivers smooth handling plus a wide speed range and incredible aerobatic performance that make it a perfect choice for experienced pilots moving into turbine-power models - plus seasoned jet pilots looking for a great value. This expertly built model combines carbon-reinforced construction, a complete hardware package, and a variety of details that provide a premium jet experience.
Key Features
- Designed for popular 100N class turbine engines (sold separately)
- Two-piece wings, stabilizers, and ventral fins plus a removable vertical stabilizer for easier storage and transport
- Two large top-hatches for tool and fastener free access to the turbine, batteries and electronics
- Electric retract set with aluminium trailing-link struts, electronic brakes and controller (sold separately or in money-saving combos)
- Two-piece, bolt-together fuselage featuring a removable nose section
- Hangar 9® Viper 100N Turbine Jet ARF
- Product Manual
- (1) 100N class turbine engine; KingTech K-102G4+ recommended
- (1) Electric retract set (HAN-3625ER; sold separately or in money-saving combos)
- (1) Full-range 10+ channel transmitter
- (4) Spektrum A5070 servos - rudder, elevators, steering
- (4) Spektrum A6320 servos - ailerons and flaps
- (1) Spektrum AR20410T Receiver
- (1) Spektrum Synapse AS3X+ Module
- (2) Spektrum 2S 4000mAh G2 LiPo receiver batteries
- (1) Spektrum 3S 3200mAh G2 LiFe ECU battery
- (2) Spektrum single-sided 1.5" aluminium servo arms - ailerons
- (2) Spektrum single-sided 1.0" aluminium servo arms - flaps
- (1) Spektrum heavy-duty servo arm
- (1) KingTech 150cc air trap
- Servo extension leads
Hangar 9 Viper 100N Turbine RC Jet ARF Introduction
Designed to offer fighter-jet looks and performance, along with the stability of a low-wing sport airplane, the full-scale Viper was developed to enable more pilots to enjoy flying a jet. The Hangar 9® Viper 100N Turbine Jet model follows suit, both in its appearance and how it delivers the widest flight envelope possible — whether you've flown many jets before or even if it's your first giant scale turbine jet model. Expertly crafted from lightweight balsa and plywood reinforced with carbon fiber, the Almost-Ready-To-Fly (ARF) airframe arrives ready for installation of your choice of a popular 100N class turbine engine (sold separately). A complete hardware kit, dual-wall stainless steel pipe, and fuel tank ensure you spend less time shopping for parts and more time flying. Finished in a modern trim scheme with printed covering, the Viper 100N catches your eye both on the ground and in the air.
Hangar 9 Viper 100N Turbine RC Jet ARF Overview
The Hangar 9® Viper 100N Turbine Jet is a perfect choice for experienced pilots moving into giant-scale turbine-powered models for the first time. It's also an excellent choice for seasoned turbine jet pilots looking for great value in a popular design known to offer smooth handling, excellent speed, and aerobatic performance. The airframe is factory-assembled with carbon fibre–reinforced balsa and plywood construction. A comprehensive and complete hardware pack, including a fuel tank, dual-wall stainless steel tailpipe, and assembly hardware, is included in the box.
Large top hatches offer easy access to the turbine, fuel system, and electronics. The electric retract set is available in money-saving combos and is equipped with durable aluminium trailing-link struts and electric brakes, which allow the Viper to take off from and land on smooth. The retract set also includes a retract controller with adjustable brake strength and a test function that allows retract operation without the transmitter. A complete set of optional-use gear doors with mounting hardware and linkages is also included.
Included navigation and landing lights enhance the scale experience and visibility. Plus, the two-piece wing, horizontal stabilizers, vertical stabilizer, and ventral fins can be removed with ease for safer storage and transport in the optional padded wing/stab and fuse bags (sold separately).
Hangar 9 Viper 100N Turbine RC Jet ARF Features
- Modern trim scheme featuring printed covering with panel lines and other details
- Carbon fibre reinforced wood construction provides a light and strong airframe
- Includes a complete hardware set
- Detailed cockpit with a painted pilot figure and 3D instrument panels
- Complete landing gear door set with hardware and linkages
- Includes a fuel tank and dual-wall stainless steel tail pipe
- Optional reflective sun cover plus padded wing/stab and fuse bags available separately
Skill Level 4 – Advanced Pilots (Advanced Experience Required)
Skill Level 4 aircraft are intended for advanced pilots who already have the skills to assemble, set up, and fly similar class models. These aircraft often deliver even higher performance while requiring more skill to fly, as well as additional assembly and setup steps, than Skill Level 3 aircraft. You should have the experience and skills necessary to successfully fly models like the E-flite Viper 90mm EDF, Hangar 9 Aermacchi MB-339 60-86N Turbine Jet, or other similar class models before attempting to fly the Viper 100N.
Almost-Ready-To-Fly Flexibility
This Almost-Ready-To-Fly (ARF) airframe arrives mostly factory assembled to save you considerable time and effort. Plus, it's ready for you to install a 100N class turbine engine and the electronics you prefer!
Lightweight Construction
Laser-cut, carbon-reinforced balsa and plywood construction with printed covering brings the Viper to life as a scale model that's expertly built to exacting standards.
100N Turbine Ready Airframe
This Viper pairs perfectly with modern turbine engines from brands like KingTech and JetCat in the 100N class. The KingTech K-102G4+ is what powered the development and test airframes. It's our preferred engine because it provides a great combination of power, performance, and flight time (larger turbine engines have too much residual thrust for easy landings and are not recommended).
Large Top Hatch Access
Two hatches open tool and fastener free to reveal the turbine bay, battery trays and receiver compartment. Big openings mean fast hookups, quick troubleshooting, and efficient field-service routines—even when the flight line is busy.
Modular Design
The two-piece wings, stabilizers and ventral fins slip off in seconds thanks to carbon-fiber and aluminium joiner tubes plus convenient hardware. Stow them in the optional (sold separately) padded transport and storage bags.
Electric Retracts and Brakes
The complete retractable landing gear set (sold separately or in money-saving combos) includes durable aluminium trailing-link struts, integrated electric brakes, and a gear controller with brake adjustments that also includes a test button for cycling the landing gear without needing a transmitter.
Gear Doors
A complete and optional-use landing gear door set including all linkages and mounting hardware is supplied and to provide a scale finishing touch.
| Spec | Data |
|---|---|
| Wingspan | 2098mm |
| Weight | 14.8Kg |
| Length | 1953mm |
Related Items
Completion Guide
Optional Parts
| Image | Item Id | Name | Trade | SRP | Order Now |
|---|---|---|---|---|---|
 | O-HAN339010P | 10-Pin Connector Set (2) | £24.99 | ||
 | O-HAN33906P | 6-Pin Connector Set (2) | £17.99 | ||
 | P-SPMA3004 | Heavy-Duty Servo Extension 18 | £9.99 | ||
 | P-SPMA3005 | Heavy-Duty Servo Extension 24 | £10.99 | ||
 | P-SPMA3006 | Heavy-Duty Servo Extension 36 | £11.99 | ||
 | P-SPMAR20410T | AR20410T 20-Channel PowerSafe Telemetry Receiver | £399.99 | ||
 | P-SPMAS6000 | Synapse AS3X+ & SAFE Stabilization Module | £89.99 | ||
 | P-SPMSA5070 | A5070 High Torque High Speed Mini MG HV Servo | £169.99 | ||
 | P-SPMSA6320 | A6320 Ultra Torque High Speed Metal BL HV Servo | £99.99 | ||
 | Z-HAN-362533 | Reflective Sun Cover: Viper 100N Turbine Jet | £139.99 | ||
 | Z-HAN-3625ER | Electric Tricycle Retract Set with Brakes and Digital Contro | £539.99 |
Replacement Parts
