66505 Eyebolt M2 BallØ :3.8mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 5.5mm, distance across eyebolt flats 2mm.Pack of 4.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....

M2.5 Grabrail Stanchion: Stem tapers from ¥2.4 to 4.2mm, Base ¥5mm, Ball ¥4mm, Hole ¥2.5mm, Height (excluding threaded pin): 7.5mm, Threaded Pin M2.5, Threaded Pin Length 7.5mm. Pack of 10.....

66501 Eyebolt M1 BallØ :2mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1mm.Pack of 4.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....

66508 Eyebolt M3 BallØ :5.5mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 7mm, distance across eyebolt flats 3mm.Pack of 4.....

66503 Eyebolt M1.4 BallØ :2.6mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3.4mm, distance across eyebolt flats 1.4mm.Pack of 4.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body lengt....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions a....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit a....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions ar....

66504 Eyebolt M1.6 BallØ :3mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 4.5mm, distance across eyebolt flats 1.6mm.Pack of 4.....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit a....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

BR32 Stag Horn Bollard L15, H8: 3D Resin Printed Staghorn Bollard, Base: 15x6mm, Height: 8mm.Pack of 2.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....

66502 Eyebolt M1.2 BallØ :2.3mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1.2mm.Pack of 4.....

M1 Grabrail Stanchion: Stem tapers from ¥0.8 to 1.2mm, Base ¥2mm, Ball ¥1.6mm, Hole ¥0.75mm, Height (excluding threaded pin): 3.5mm, Threaded Pin M1, Threaded Pin Length 5mm. Pack of 10.....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and finis....

M1.6 Grabrail Stanchion: Stem tapers from ¥1.5 to 2.5mm, Base ¥3mm, Ball ¥2.5mm, Hole ¥1.3mm, Height (excluding threaded pin): 4.5mm, Threaded Pin M1.6, Threaded Pin Length 5mm. Pack of 10.....

Stanchion Height (excluding upper and lower locating pins): 20mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ball Diameter: 1.8mm Hole Diameter: 0.75mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

BR34 Cowl Ventilators (Resin) Ø 7, H28mm, on long stem: 3D Resin Printed Cowl Ventilators, Base: Ø 4mm, Stem Ø 3mm, Height: 28mm, Vent Outer Ø 7mm, Vent Inner Ø 5.5mm.Pack of 2.....

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body lengt....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body lengt....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

M2 Grabrail Stanchion: Stem tapers from ¥2 to 3.5mm, Base ¥4.5mm, Ball ¥3.5mm, Hole ¥2mm, Height (excluding threaded pin): 6mm, Threaded Pin M2, Threaded Pin Length 7mm. Pack of 10.....

62100 Ships Horn Ø :3.5mm L:9mm: Bell tapers from Ø 3.5 to 1mm along 6.2mm length.Diaphragm chamber Ø 2.6mm length 2.8mm.Overall height (excluding fixing pin): 4.2mm, Fixing Pin Ø 1mm, Fixing Pin Length 2mm.Pack of 2.....

Shackle Width: 5mm Shackle Length: 8mm Opening Width: 3mm Opening Length: 5.25mm Eye Diameter: 2.5mm Hole Diameter: 1.05mm Pin Thread: M1 Pack of 2. ....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions a....

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body lengt....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....

66507 Eyebolt M2.5 BallØ :5mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 6.6mm, distance across eyebolt flats 2.5mm.Pack of 4.....

BR5123 Cowl Ventilators (Resin) Ø 12, H27mm: 3D Resin Printed Cowl Ventilators, Base: Ø 10mm, Stem Ø 8mm, Height: 27mm, Vent Outer Ø 12mm, Vent Inner Ø 10.5mm.Pack of 2.....

BR55 Cowl Ventilators (Resin) Ø 23, H35mm: 3D Resin Printed Cowl Ventilators, Stem Ø 12mm, Height: 35mm, Vent Outer Ø 23mm, Vent Inner Ø 21mm.Pack of 2.....

BR1201 Cowl Ventilators (Resin) Ø 10, H36mm, on long stem: 3D Resin Printed Cowl Ventilators, Stem Ø 6.5mm, Height: 36mm, Vent Outer Ø 10mm, Vent Inner Ø 8.7mm.Pack of 2.....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit a....

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body length fr....

62109 Ships Horn Ø :7mm L:22.5mm: Bell tapers from Ø 7 to 2.1mm along 16.9mm length.Diaphragm chamber Ø 5.2mm length 5.6mm.Overall height (excluding fixing pin): 8.6mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....

Shackle Width: 4mm Shackle Length: 7mm Opening Width: 2mm Opening Length: 4.25mm Eye Diameter: 2.5mm Hole Diameter: 1.05mm Split Pin Diameter: 0.5mmPack of 2.....

Shackle Width: 5mm Shackle Length: 8mm Opening Width: 3mm Opening Length: 5.25mm Eye Diameter: 2.5mm Hole Diameter: 1.05mm Pin Diameter: 1mm Split Pin Diameter: 0.5mmPack of 2.....

Shackle Width: 6mm Shackle Length: 10.5mm Opening Width: 3.2mm Opening Length: 6.9mm Eye Diameter: 3mm Hole Diameter: 1.45mm Pin Diameter: 1.4mm Split Pin Diameter: 0.75mmPack of 2.....

Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body l....

Stanchion Height (excluding upper and lower locating pins): 25mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ball Diameter: 1.8mm Hole Diameter: 0.75mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

BR559 Bollard (Straight Webbed) L40 H19: 3D Resin Printed Bollard, Base: 40x14.5mm, Height: 19mm, Post Ø 6mm.Pack of 2.....

BR560 Bollard (Angled Webbed) L40 H19: 3D Resin Printed Bollard, Base: 40x14.5mm, Height: 19mm, Post Ø 6mm, Post Angle 10deg Past Vertical.Pack of 2.....

Stanchion Height (excluding upper and lower locating pins): 35mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

66506 Eyebolt M2.5 BallØ :4.5mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 6.1mm, distance across eyebolt flats 2.5mm.Pack of 4.....

Turnbuckle Barrel Length: 24mm Turnbuckle Barrel Diameter: 3mm Authentic Simulated Left/Right Hand Threads Eye Diameter: 3mm Hole Diameter: 1.6mm Fixed Overall Length: 40mm Distance Between Hole Centres: 37mm Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at var....

Turnbuckle Barrel Length: 16mm Turnbuckle Barrel Diameter: 3mm Authentic Simulated Left/Right Hand Threads Eye Diameter: 3mm Hole Diameter: 1.6mm Fixed Overall Length: 30mm Distance Between Hole Centres: 27mm Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at var....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....

10mm Mast Base: Base ¥18mm, Hole ¥10mm, Height: 11mm. Pack of 1.....

6mm Mast Base: Base ¥12mm, Hole ¥6mm, Height: 6.7mm. Pack of 1.....

Shackle Width: 7.6mm Shackle Length: 12.2mm Opening Width: 3.8mm Opening Length: 7.5mm Eye Diameter: 3.5mm Hole Diameter: 2.05mm Pin Diameter: 2mm Split Pin Diameter: 0.75mmPack of 2.....

Shackle Width: 11mm Shackle Length: 15mm Opening Width: 6.4mm Opening Length: 9.4mm Eye Diameter: 4mm Hole Diameter: 2.55mm Pin Diameter: 2.5mm Split Pin Diameter: 1mmPack of 2.....

Shackle Width: 4.4mm Shackle Length: 8.2mm Opening Width: 2mm Opening Length: 5mm Eye Diameter: 2.75mm Hole Diameter: 1.25mm Pin Diameter: 1.2mm Split Pin Diameter: 0.5mmPack of 2.....

Shackle Width: 5.6mm Shackle Length: 8.6mm Opening Width: 2.8mm Opening Length: 5.1mm Eye Diameter: 3mm Hole Diameter: 1.25mm Pin Diameter: 1.2mm Split Pin Diameter: 0.5mmPack of 2.....

Shackle Width: 4mm Shackle Length: 7mm Opening Width: 2mm Opening Length: 4.25mm Eye Diameter: 2.5mm Hole Diameter: 1.05mm Pin Thread: M1 Pack of 2. ....

Shackle Width: 4.4mm Shackle Length: 8.2mm Opening Width: 2mm Opening Length: 5mm Eye Diameter: 2.75mm Hole Diameter: 1.25mm Pin Thread: M1.2 Pack of 2. ....

Shackle Width: 5.6mm Shackle Length: 8.6mm Opening Width: 2.8mm Opening Length: 5.1mm Eye Diameter: 3mm Hole Diameter: 1.25mm Pin Thread: M1.2 Pack of 2. ....

Shackle Width: 6mm Shackle Length: 10.5mm Opening Width: 3.2mm Opening Length: 6.9mm Eye Diameter: 3mm Hole Diameter: 1.45mm Pin Thread: M1.4 Pack of 2. ....

Shackle Width: 7.6mm Shackle Length: 12.2mm Opening Width: 3.8mm Opening Length: 7.5mm Eye Diameter: 3.5mm Hole Diameter: 2.05mm Pin Thread: M2 Pack of 2. ....

Shackle Width: 11mm Shackle Length: 15mm Opening Width: 6.4mm Opening Length: 9.4mm Eye Diameter: 4mm Hole Diameter: 2.55mm Pin Thread: M2.5 Pack of 2. ....

Stanchion Height (excluding upper and lower locating pins): 20mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ball Diameter: 1.8mm Hole Diameter: 0.75mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

Stanchion Height (excluding upper and lower locating pins): 30mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

Stanchion Height (excluding upper and lower locating pins): 25mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ball Diameter: 1.8mm Hole Diameter: 0.75mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

Stanchion Height (excluding upper and lower locating pins): 35mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

Stanchion Height (excluding upper and lower locating pins): 15mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ball Diameter: 1.8mm Hole Diameter: 0.75mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

Stanchion Height (excluding upper and lower locating pins): 40mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

Stanchion Height (excluding upper and lower locating pins): 30mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

Stanchion Height (excluding upper and lower locating pins): 40mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....

BR1968 Cowl Ventilators (Resin) Ø 29, H40mm: 3D Resin Printed Cowl Ventilators, Stem Ø 12.5mm, Height: 40mm, Vent Outer Ø 29mm, Vent Inner Ø 26mm.Pack of 2.....

BR558 Cowl Ventilators (Resin) Ø 37, H45mm, with fabricating detail: 3D Resin Printed Cowl Ventilators, Stem Ø 16mm, Height: 45mm, Vent Outer Width 32.5mm, Outer Height 34mm, Vent Inner Width 31.3mm Vent Inner Height 32.8mm.Pack of 2.....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....

Turnbuckle Barrel Length: 10mm Turnbuckle Barrel Diameter: 3mm Authentic Simulated Left/Right Hand Threads Eye Diameter: 3mm Hole Diameter: 1.6mm Fixed Overall Length: 20mm Distance Between Hole Centres: 17mm Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at var....

Turnbuckle Barrel Length: 13mm Turnbuckle Barrel Diameter: 3mm Authentic Simulated Left/Right Hand Threads Eye Diameter: 3mm Hole Diameter: 1.6mm Fixed Overall Length: 25mm Distance Between Hole Centres: 22mm Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at var....

62107 Ships Horn Ø :6mm L:20mm: Bell tapers from Ø 6 to 1.8mm along 15.2mm length.Diaphragm chamber Ø 4.4mm length 4.8mm.Overall height (excluding fixing pin): 6.8mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....

Drum Maximum Diameter: 9mm Drum Minimum Diameter: 5.75mm Length: 12mm Locating Hole Diameter: 2.5mm Gypsy wheel is machined to allow simulation of lifting studded link anchor chain sold separately. ....