J-RMA66505
Eyebolt M2 Ball¥:3.8mm Thread Length :14mm(Pk4)
£1.40
66505 Eyebolt M2 BallØ :3.8mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 5.5mm, distance across eyebolt flats 2mm.Pack of 4.....
J-RMA66315
3 Hole Stanchion, Brass 15mm (Pk10)
£6.90
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....
J-RMA66220
2 Hole Stanchion, Brass 20mm (Pk10)
£6.20
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA66320
3 Hole Stanchion, Brass 20mm (Pk10)
£6.90
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....
J-RMA66501
Eyebolt M1 Ball¥:2mm Thread Length :12mm(Pk4)
£1.20
66501 Eyebolt M1 BallØ :2mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1mm.Pack of 4.....
J-RMA66515
M2.5 Grabrail Stanchion ¥4mm (pk10)
£2.90
M2.5 Grabrail Stanchion: Stem tapers from ¥2.4 to 4.2mm, Base ¥5mm, Ball ¥4mm, Hole ¥2.5mm, Height (excluding threaded pin): 7.5mm, Threaded Pin M2.5, Threaded Pin Length 7.5mm. Pack of 10.....
J-RMA66240
2 Hole Stanchion, Brass 40mm (Pk10)
£6.80
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA66215
2 Hole Stanchion, Brass 15mm (Pk10)
£5.65
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA66503
Eyebolt M1.4 Ball¥:2.6mm Thread Length :12mm(Pk4)
£1.30
66503 Eyebolt M1.4 BallØ :2.6mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3.4mm, distance across eyebolt flats 1.4mm.Pack of 4.....
J-RMA66225
2 Hole Stanchion, Brass 25mm (Pk10)
£6.20
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA66504
Eyebolt M1.6 Ball¥:3mm Thread Length :12mm(Pk4)
£1.30
66504 Eyebolt M1.6 BallØ :3mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 4.5mm, distance across eyebolt flats 1.6mm.Pack of 4.....
J-RMA66508
Eyebolt M3 Ball¥:5.5mm Thread Length :14mm(Pk4)
£1.45
66508 Eyebolt M3 BallØ :5.5mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 7mm, distance across eyebolt flats 3mm.Pack of 4.....
J-RMA66235
2 Hole Stanchion, Brass 35mm (Pk10)
£6.75
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA645320
Turnbuckle, 3mm Eye, 20mm Ctr
£6.30
Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body lengt....
J-RMA66230
2 Hole Stanchion, Brass 30mm (Pk10)
£6.25
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA66330
3 Hole Stanchion, Brass 30mm (Pk10)
£6.99
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....
J-RMA3090
Rigging Bowsie 3 hole
£1.99
J-RMA66110
1 Hole Stanchion, Brass 10mm (Pk10)
£4.45
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions a....
J-RMA66511
M1 Grabrail Stanchion ¥1.6mm (pk10)
£2.60
M1 Grabrail Stanchion: Stem tapers from ¥0.8 to 1.2mm, Base ¥2mm, Ball ¥1.6mm, Hole ¥0.75mm, Height (excluding threaded pin): 3.5mm, Threaded Pin M1, Threaded Pin Length 5mm. Pack of 10.....
J-RMA67108
Porthole, 8mm, Without Flange, Glazed, 10pk
£5.85
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA67110
Porthole, 10mm, Without Flange, Glazed, 10pk
£5.85
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA67104
Porthole, 4mm, Without Flange, Glazed, 10pk
£5.85
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit a....
J-RMA66513
M1.6 Grabrail Stanchion ¥2.5mm (pk10)
£2.58
M1.6 Grabrail Stanchion: Stem tapers from ¥1.5 to 2.5mm, Base ¥3mm, Ball ¥2.5mm, Hole ¥1.3mm, Height (excluding threaded pin): 4.5mm, Threaded Pin M1.6, Threaded Pin Length 5mm. Pack of 10.....
J-RMA67020
Porthole, 20mm, With 6 Hole Flange, Glazed, 10pk
£9.40
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA67105
Porthole, 5mm, Without Flange, Glazed, 10pk
£5.85
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit a....
J-RMABR32
Stag Horn Bollard L15, H8(Pk2)
£1.60
BR32 Stag Horn Bollard L15, H8: 3D Resin Printed Staghorn Bollard, Base: 15x6mm, Height: 8mm.Pack of 2.....
J-RMA66310
3 Hole Stanchion, Brass 10mm (Pk10)
£6.80
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....
J-RMA66210
2 Hole Stanchion, Brass 10mm (Pk10)
£5.40
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA67008
8mm Porthole with Flange
£5.90
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and finis....
J-RMA66502
Eyebolt M1.2 Ball¥:2.3mm Thread Length :12mm(Pk4)
£1.20
66502 Eyebolt M1.2 BallØ :2.3mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1.2mm.Pack of 4.....
J-RMA66514
M2 Grabrail Stanchion ¥3.5mm (pk10)
£2.90
M2 Grabrail Stanchion: Stem tapers from ¥2 to 3.5mm, Base ¥4.5mm, Ball ¥3.5mm, Hole ¥2mm, Height (excluding threaded pin): 6mm, Threaded Pin M2, Threaded Pin Length 7mm. Pack of 10.....
J-RMA66220C
2 Hole Capping Rail Stanchion, Brass 20mm
£6.99
Stanchion Height (excluding upper and lower locating pins): 20mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ball Diameter: 1.8mm Hole Diameter: 0.75mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMA62202
Shackle 5x8, M1 Threaded Pin (pk2)
£6.50
Shackle Width: 5mm
Shackle Length: 8mm
Opening Width: 3mm
Opening Length: 5.25mm
Eye Diameter: 2.5mm
Hole Diameter: 1.05mm
Pin Thread: M1
Pack of 2.
....
J-RMA645314
Turnbuckle, 3mm Eye, 14mm Ctr
£5.70
Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body lengt....
J-RMA645318
Turnbuckle, 3mm Eye, 18mm Ctr
£6.25
Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body lengt....
J-RMA67014
Porthole, 14mm, With 6 Hole Flange, Glazed, 10pk
£7.75
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMABR34
Cowl Ventilators (Resin) ¥7, H28mm, on long stem(Pk2)
£3.25
BR34 Cowl Ventilators (Resin) Ø 7, H28mm, on long stem: 3D Resin Printed Cowl Ventilators, Base: Ø 4mm, Stem Ø 3mm, Height: 28mm, Vent Outer Ø 7mm, Vent Inner Ø 5.5mm.Pack of 2.....
J-RMABR5123
Cowl Ventilators (Resin) ¥12, H27mm(Pk2)
£3.60
BR5123 Cowl Ventilators (Resin) Ø 12, H27mm: 3D Resin Printed Cowl Ventilators, Base: Ø 10mm, Stem Ø 8mm, Height: 27mm, Vent Outer Ø 12mm, Vent Inner Ø 10.5mm.Pack of 2.....
J-RMA62100
Ships Horn ¥:3.5mm L:9mm(Pk2)
£3.80
62100 Ships Horn Ø :3.5mm L:9mm: Bell tapers from Ø 3.5 to 1mm along 6.2mm length.Diaphragm chamber Ø 2.6mm length 2.8mm.Overall height (excluding fixing pin): 4.2mm, Fixing Pin Ø 1mm, Fixing Pin Length 2mm.Pack of 2.....
J-RMA62211
Shackle 4x7, 1mm Split Pin (pk2)
£6.50
Shackle Width: 4mm Shackle Length: 7mm Opening Width: 2mm Opening Length: 4.25mm Eye Diameter: 2.5mm Hole Diameter: 1.05mm Split Pin Diameter: 0.5mmPack of 2.....
J-RMA62201
Shackle 4x7, M1 Threaded Pin (pk2)
£6.50
Shackle Width: 4mm
Shackle Length: 7mm
Opening Width: 2mm
Opening Length: 4.25mm
Eye Diameter: 2.5mm
Hole Diameter: 1.05mm
Pin Thread: M1
Pack of 2.
....
J-RMA645312
Turnbuckle, 3mm Eye, 12mm Ctr
£5.55
Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body lengt....
J-RMA67112
Porthole, 12mm, Without Flange, Glazed, 10pk
£7.25
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA66335
3 Hole Stanchion, Brass 35mm (Pk10)
£7.20
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....
J-RMA66340
3 Hole Stanchion, Brass 40mm (Pk10)
£7.50
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions are ....
J-RMA66130
1 Hole Stanchion, Brass 30mm (Pk10)
£5.40
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions a....
J-RMA66125
1 Hole Stanchion, Brass 25mm (Pk10)
£5.40
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA66115
1 Hole Stanchion, Brass 15mm (Pk10)
£4.60
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA645310
Turnbuckle, 3mm Eye, 10mm Ctr
£5.40
Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body length fr....
J-RMA62109
Ships Horn ¥:7mm L:22.5mm(Pk2)
£4.30
62109 Ships Horn Ø :7mm L:22.5mm: Bell tapers from Ø 7 to 2.1mm along 16.9mm length.Diaphragm chamber Ø 5.2mm length 5.6mm.Overall height (excluding fixing pin): 8.6mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....
J-RMA67010
Porthole, 10mm, With 6 Hole Flange, Glazed, 10pk
£5.90
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit a....
J-RMA66506
Eyebolt M2.5 Ball¥:4.5mm Thread Length :14mm(Pk4)
£1.40
66506 Eyebolt M2.5 BallØ :4.5mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 6.1mm, distance across eyebolt flats 2.5mm.Pack of 4.....
J-RMA66507
Eyebolt M2.5 Ball¥:5mm Thread Length :14mm(Pk4)
£1.45
66507 Eyebolt M2.5 BallØ :5mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 6.6mm, distance across eyebolt flats 2.5mm.Pack of 4.....
J-RMABR1201
Cowl Ventilators (Resin) ¥10, H36mm, on long stem(Pk2)
£3.40
BR1201 Cowl Ventilators (Resin) Ø 10, H36mm, on long stem: 3D Resin Printed Cowl Ventilators, Stem Ø 6.5mm, Height: 36mm, Vent Outer Ø 10mm, Vent Inner Ø 8.7mm.Pack of 2.....
J-RMA67016
Porthole, 16mm, With 6 Hole Flange, Glazed, 10pk
£8.99
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA66225C
2 Hole Capping Stanchion, Brass 25mm (pk10)
£6.99
Stanchion Height (excluding upper and lower locating pins): 25mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ball Diameter: 1.8mm Hole Diameter: 0.75mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMA62212
Shackle 5x8, 1mm Split Pin (pk2)
£6.50
Shackle Width: 5mm Shackle Length: 8mm Opening Width: 3mm Opening Length: 5.25mm Eye Diameter: 2.5mm Hole Diameter: 1.05mm Pin Diameter: 1mm Split Pin Diameter: 0.5mmPack of 2.....
J-RMA645322
Turnbuckle, 3mm Eye, 22mm Ctr
£6.50
Used for tensioning a ship's rigging and lashings, Turnbuckles are a vital element to aid control aboard any vessel. Our new range of fully working scale turnbuckles are turned out of brass to tight tolerances with eyelets at both ends for attaching to rigging meaning these beautifully manufactured pieces not only look the part but function just as well. Varying in body l....
J-RMA62215
Shackle 6x10.5, 1.4mm Split Pin (pk2)
£6.75
Shackle Width: 6mm Shackle Length: 10.5mm Opening Width: 3.2mm Opening Length: 6.9mm Eye Diameter: 3mm Hole Diameter: 1.45mm Pin Diameter: 1.4mm Split Pin Diameter: 0.75mmPack of 2.....
J-RMA645230
Fixed Turnbuckle, 16x30mm (pk2)
£1.99
Turnbuckle Barrel Length: 16mm
Turnbuckle Barrel Diameter: 3mm
Authentic Simulated Left/Right Hand Threads
Eye Diameter: 3mm
Hole Diameter: 1.6mm
Fixed Overall Length: 30mm
Distance Between Hole Centres: 27mm
Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at var....
J-RMA645240
Fixed Turnbuckle, 24x40mm (pk2)
£2.50
Turnbuckle Barrel Length: 24mm
Turnbuckle Barrel Diameter: 3mm
Authentic Simulated Left/Right Hand Threads
Eye Diameter: 3mm
Hole Diameter: 1.6mm
Fixed Overall Length: 40mm
Distance Between Hole Centres: 37mm
Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at var....
J-RMA66120
1 Hole Stanchion, Brass 20mm (Pk10)
£5.40
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA66206
2 Hole Stanchion, Brass 6mm (Pk10)
£5.40
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA66235C
2 Hole Capping Stanchion, Brass 35mm (pk10)
£7.25
Stanchion Height (excluding upper and lower locating pins): 35mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMABR559
Bollard (Straight Webbed) L40 H19(Pk2)
£9.15
BR559 Bollard (Straight Webbed) L40 H19: 3D Resin Printed Bollard, Base: 40x14.5mm, Height: 19mm, Post Ø 6mm.Pack of 2.....
J-RMABR560
Bollard (Angled Webbed) L40 H19(Pk2)
£9.99
BR560 Bollard (Angled Webbed) L40 H19: 3D Resin Printed Bollard, Base: 40x14.5mm, Height: 19mm, Post Ø 6mm, Post Angle 10deg Past Vertical.Pack of 2.....
J-RMABR55
Cowl Ventilators (Resin) ¥23, H35mm(Pk2)
£7.80
BR55 Cowl Ventilators (Resin) Ø 23, H35mm: 3D Resin Printed Cowl Ventilators, Stem Ø 12mm, Height: 35mm, Vent Outer Ø 23mm, Vent Inner Ø 21mm.Pack of 2.....
J-RMABR558
Cowl Ventilators (Resin) ¥37, H45mm, with fabricating detail
£11.30
BR558 Cowl Ventilators (Resin) Ø 37, H45mm, with fabricating detail: 3D Resin Printed Cowl Ventilators, Stem Ø 16mm, Height: 45mm, Vent Outer Width 32.5mm, Outer Height 34mm, Vent Inner Width 31.3mm Vent Inner Height 32.8mm.Pack of 2.....
J-RMABR1968
Cowl Ventilators (Resin) ¥29, H40mm(Pk2)
£8.40
BR1968 Cowl Ventilators (Resin) Ø 29, H40mm: 3D Resin Printed Cowl Ventilators, Stem Ø 12.5mm, Height: 40mm, Vent Outer Ø 29mm, Vent Inner Ø 26mm.Pack of 2.....
J-RMA67018
Porthole, 18mm, With 6 Hole Flange, Glazed, 10pk
£9.40
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA67114
Porthole, 14mm, Without Flange, Glazed, 10pk
£7.75
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA67116
Porthole, 16mm, Without Flange, Glazed, 10pk
£8.99
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA67118
Porthole, 18mm, Without Flange, Glazed, 10pk
£9.50
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA67120
Porthole, 20mm, Without Flange, Glazed, 10pk
£9.75
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA66230C
2 Hole Capping Stanchion, Brass 30mm (pk10)
£6.99
Stanchion Height (excluding upper and lower locating pins): 30mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMA66240C
2 Hole Capping Stanchion, Brass 40mm (pk10)
£7.50
Stanchion Height (excluding upper and lower locating pins): 40mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMA66215C
2 Hole Capping Stanchion, Brass 15mm (pk10)
£6.99
Stanchion Height (excluding upper and lower locating pins): 15mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ball Diameter: 1.8mm Hole Diameter: 0.75mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMA67012
Porthole, 12mm, With 6 Hole Flange, Glazed, 10pk
£7.15
The function of a porthole is to permit light and fresh air to enter the dark and often damp below-deck quarters of a vessel and is predominantly associated with ships (even though portholes can be found on space crafts, aircrafts and cars). This precisely turned brass accessory is available with and without a flange in a range of sizes all fully glazed and ready to fit and f....
J-RMA66325
3 Hole Stanchion, Brass 25mm (Pk10)
£6.90
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 10-40mm. Manufactured from brass to tight tolerances our Stanchions ar....
J-RMA66120C
1 Hole Capping Stanchion, Brass 20mm (pk10)
£6.25
Stanchion Height (excluding upper and lower locating pins): 20mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ball Diameter: 1.8mm Hole Diameter: 0.75mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMA66125C
1 Hole Capping Stanchion, Brass 25mm (pk10)
£6.25
Stanchion Height (excluding upper and lower locating pins): 25mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ball Diameter: 1.8mm Hole Diameter: 0.75mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMA66135C
1 Hole Capping Stanchion, Brass 35mm (pk10)
£6.75
Stanchion Height (excluding upper and lower locating pins): 35mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMA66140
1 Hole Stanchion, Brass 40mm (Pk10)
£5.65
A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, our rage offers Stanchions with one, two and three balls for chain or rope to pass through in lengths ranging from 6-40mm. Manufactured from brass to tight tolerances our Stanchions are t....
J-RMA66140C
1 Hole Capping Stanchion, Brass 40mm (pk10)
£6.99
Stanchion Height (excluding upper and lower locating pins): 40mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMA66130C
1 Hole Capping Stanchion, Brass 30mm (pk10)
£6.25
Stanchion Height (excluding upper and lower locating pins): 30mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1.5mm Capping Locating Pin Diameter: 1.0mm Stanchion Diameter: 1.2mm Ball Diameter: 2.5mm Hole Diameter: 1.05mmCapping locating pin is tapered to a point to assist in position marking for drilling of the capping rail. Pack of 10.....
J-RMA66132C
1 Hole Capping Rail Stanchion, Brass 32mm
£6.99
J-RMA62216
Shackle 7.6x12.2, 2mm Split Pin (pk2)
£6.99
Shackle Width: 7.6mm Shackle Length: 12.2mm Opening Width: 3.8mm Opening Length: 7.5mm Eye Diameter: 3.5mm Hole Diameter: 2.05mm Pin Diameter: 2mm Split Pin Diameter: 0.75mmPack of 2.....
J-RMA62217
Shackle 11x15, 2.5mm Split Pin (pk2)
£6.99
Shackle Width: 11mm Shackle Length: 15mm Opening Width: 6.4mm Opening Length: 9.4mm Eye Diameter: 4mm Hole Diameter: 2.55mm Pin Diameter: 2.5mm Split Pin Diameter: 1mmPack of 2.....
J-RMA62213
Shackle 4.4x8.2, 1.2mm Split Pin (pk2)
£6.50
Shackle Width: 4.4mm Shackle Length: 8.2mm Opening Width: 2mm Opening Length: 5mm Eye Diameter: 2.75mm Hole Diameter: 1.25mm Pin Diameter: 1.2mm Split Pin Diameter: 0.5mmPack of 2.....
J-RMA62214
Shackle 5.6x8.6, 1.2mm Split Pin (pk2)
£6.75
Shackle Width: 5.6mm Shackle Length: 8.6mm Opening Width: 2.8mm Opening Length: 5.1mm Eye Diameter: 3mm Hole Diameter: 1.25mm Pin Diameter: 1.2mm Split Pin Diameter: 0.5mmPack of 2.....
J-RMA62203
Shackle 4.4x8.2, M1.2 Threaded Pin (pk2)
£6.50
Shackle Width: 4.4mm
Shackle Length: 8.2mm
Opening Width: 2mm
Opening Length: 5mm
Eye Diameter: 2.75mm
Hole Diameter: 1.25mm
Pin Thread: M1.2 Pack of 2.
....
J-RMA62204
Shackle 5.6x8.6, M1.2 Threaded Pin (pk2)
£6.75
Shackle Width: 5.6mm
Shackle Length: 8.6mm
Opening Width: 2.8mm
Opening Length: 5.1mm
Eye Diameter: 3mm
Hole Diameter: 1.25mm
Pin Thread: M1.2
Pack of 2.
....
J-RMA62205
Shackle 6x10.5, M1.4 Threaded Pin (pk2)
£6.75
Shackle Width: 6mm
Shackle Length: 10.5mm
Opening Width: 3.2mm
Opening Length: 6.9mm
Eye Diameter: 3mm
Hole Diameter: 1.45mm
Pin Thread: M1.4
Pack of 2.
....
J-RMA62206
Shackle 7.6x12.2, M2 Threaded Pin (pk2)
£6.99
Shackle Width: 7.6mm
Shackle Length: 12.2mm
Opening Width: 3.8mm
Opening Length: 7.5mm
Eye Diameter: 3.5mm
Hole Diameter: 2.05mm
Pin Thread: M2
Pack of 2.
....
J-RMA62207
Shackle 11x15, M2.5 Threaded Pin (pk2)
£6.99
Shackle Width: 11mm
Shackle Length: 15mm
Opening Width: 6.4mm
Opening Length: 9.4mm
Eye Diameter: 4mm
Hole Diameter: 2.55mm
Pin Thread: M2.5
Pack of 2.
....
J-RMA62042
6mm Mast Base
£3.80
6mm Mast Base: Base ¥12mm, Hole ¥6mm, Height: 6.7mm. Pack of 1.....
J-RMA62046
10mm Mast Base
£4.20
10mm Mast Base: Base ¥18mm, Hole ¥10mm, Height: 11mm. Pack of 1.....
J-RMA62107
Ships Horn ¥:6mm L:20mm(Pk2)
£4.20
62107 Ships Horn Ø :6mm L:20mm: Bell tapers from Ø 6 to 1.8mm along 15.2mm length.Diaphragm chamber Ø 4.4mm length 4.8mm.Overall height (excluding fixing pin): 6.8mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....
J-RMA62305
Warping Drum with Gypsy Wheel 9x12mm (pk2)
£2.25
Drum Maximum Diameter: 9mm
Drum Minimum Diameter: 5.75mm
Length: 12mm
Locating Hole Diameter: 2.5mm
Gypsy wheel is machined to allow simulation of lifting studded link anchor chain sold separately.
....
J-RMA645220
Fixed Turnbuckle, 10x20mm (pk2)
£1.75
Turnbuckle Barrel Length: 10mm
Turnbuckle Barrel Diameter: 3mm
Authentic Simulated Left/Right Hand Threads
Eye Diameter: 3mm
Hole Diameter: 1.6mm
Fixed Overall Length: 20mm
Distance Between Hole Centres: 17mm
Eyes are offset through 90 degrees. For added authenticity the hole through each barrel which would be used for tensioning/de-tensioning is drill at var....
Page 1 | | | Next >> |