OverviewInput Voltage 3 – 5.5 volts Do not exceed 5.5 volts this will damage your controller LED Lights – Up to 16 E-flite Universal light Kit LEDs can be used on one controller On – Off can be operated by a channel on your receiver On – Off occurs at approximately middle stick positionOn at > 1.5ms - Off at < 1.5ms Average Current Load 6....

Key Features Plugs directly into the receiver using standard servo connectors Connect and control multiple mechanisms with a single radio channel One-by-one and programmed delay modes Electronic and manual release mechanisms Ready to use and easy to install Overview The E-flite servoless payload release enables you to drop a single pay....

Overview Specifications: Length/Diameter: 5 in (127mm) Pitch: 2.75 in (69m) Inner Diameter Hole: 0.157 (4mm) Material: Black Composite ....

Key Features 1.375 inches (1-3/8") from Mount to tip of shaft 8-32 internal thread 8 x 1.25 external thread....

Key Features Attaches to factory-installed mounts in the UMX™ Carbon Cub SS (EFLU1180) Floatplane option takes only minutes to complete Painted with authentic scale appeal Mounting hardware included with pre-bent wire struts Lightweight design with efficient hull shapeOverviewThe UMX™ Carbon Cub SS float set is a great option that adds even mo....

This is required to mount the Carbon-Z Float set (EFLA5600) to the Carbon-Z Cessna 150 (EFL1450/EFL1475)....

<p>This is required to mount the Carbon-Z Float set (EFLA5600) to the Carbon-Z Cub (EFL10450/EFL10475)</p>....

Key FeaturesIdeal for scale airplanes equipped with a 50-60cc gas engine or equivalentAllows the operation and sequencing of retracts and gear doors with a single receiver channelElectronic control box offers sequence option and auxiliary powerIncluded programming unit features an LCD display and remote functionalityCNC machined, aluminum offset oleo struts delivers an....

Key FeaturesRobust landing gear strut and mounting bracketIntegrated electric motor with a micro PCBBuilt-in overcurrent protectionStrut Diameter: 0.137 in (3.5mm)Aircraft Weight: 4.00 - 7.00 lb (1.80 - 3.10kg)OverviewAdd the realism of functioning retracts to your 15- to 25-sized airplanes. E-flite's completely self-contained retract systems require no air ta....

Key FeaturesMain Gear Strut diameter: 4mmNose Gear Strut diameter: 4mmDetailed Information25-46 Size Main Retract Units (mm) 25-46 Size Nose Gear Unit (mm)....

Key FeaturesAll-aluminum CNC-machined retract unitIntegrated electric motor with a micro PCB eliminating the need for a retract servoBrass wheel collars and fully-bushed brass pivot points for smooth, trouble-free operationBuilt-in over-current protectionScale-appearance 100-degree retraction sweep and 90-degree rotationChrome-plated landing gear strutRecommended f....

Key FeaturesStrut diameter: 4mmDetailed Information25-46 Size Main Retract Units (mm)....

OverviewThis product is not intended for use by children under 14 years of age without direct adult supervision.Detailed Information25-46 Size Nose Gear Unit (mm) ....

Detailed Information60-120 Size Nose Gear Unit (mm)....

Detailed Information25-46 Size Main Retract Units (mm)....

Key Features Robust landing gear strut and mounting bracket Integrated electric motor with a micro PCB Built-in over-current protection Aircraft weight: 2.00-4.50 lb (0.90-2.00 kg) Strut diameter 0.118 in (3mm) Strut length 0.866 in (22mm)Video Overview OverviewYou don’t have to be a master modeler to add the realism....

Detailed Information15-25 Size Nose Gear Unit (mm) ....

Detailed Information15-25 Size Main Retract Units (mm)....

Detailed Information15-25 Size Nose Gear Unit (mm) ....

Video OverviewDetailed Information10-15 Size Main Retract Units (mm)....

Video OverviewDetailed Information10-15 Size Nose Gear Unit (mm)....