Sinlge insert for coupling - brass.....

Small control horn with screws and nuts. For rudder, elevator, aileron control etc., Screw size: 10ba. x 3/4".....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

Comprising of a brass rudder riveted to shaft. Glass filled nylon outer bearing, brass nut and washer, rubber sealing ring, glass-filled tiller arm with clamp fitting.Medium rudder blade.....

....

Comprising of a brass rudder riveted to shaft. Glass filled nylon outer bearing, brass nut and washer, rubber sealing ring, glass-filled tiller arm with clamp fitting.Mini rudder blade.....

Allows you to choose width for particular engine size. Supplied with mounting bolts and nuts.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

All fuel tanks are supplied with brass tubing, brass clunk and internal silicone tube.12oz - 340mlDimensions length: 118mm (Ex lid) Width: 68mm Depth: 48mm....

Sinlge insert for coupling - brass.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

Ensuring secure seating of wings to fuselage.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

Two in a set, 6-1/4" rod set at 90° one end and threaded, with adjustable control horn to allow variable movement of control surface, supplied with two bearings, opposite end of rod easily angled to s....

Steel stud, M3. 45mm long.....

For connecting push-rods to control horns, servos and rudders etc. Combines with 2mm threaded rod F-LA380/M2 and with metal extenders F-LA370/M2 to make them adjustable. Length: 21mm.....

Mini snap link, complete with 8" adjustable connecting rod.....

This rubber coupling is used to connect a 1.5mm shaft to a 2mm shaft.Length: 15mmOuter Diameter: 6mm....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

Rx antenna tube.A hollow tube through which the aerial wire is threaded and folded over to form a hook at the top, makes a tidy job and prevents any entaglement with the mechanics. Lengh approximat....

Sinlge insert for coupling - brass.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ....

Similar to the P-LA1735 to above except designed for micro servos, e.g. S143, HS80 and NES341 and similar.....

Moulded in glass-filled nylon, motor easily fixed by self-tapping screws or nuts and bolts in pre-drilled holes. The face is grooved for nose leg.Size: 10/15....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

Moulded in glass-filled nylon, motor easily fixed by self-tapping screws or nuts and bolts in pre-drilled holes. The face is grooved for nose leg.Size: 19/30....

Moulded in nylon. Suitable for micro, mini and standard size servos. For wing mounted aileron servos and side mounting applications.....

Multi purpose accessory for boats, aircraft etc. where steering control is required. Double arms with clamp action shaft fitting. Shaft Dia. 3/16".....

Control horn 14SWG....

Undercarriage ClampsMoulded in nylon for clamping nose legs and wire under-carriages. For 6g, 8g, 10g and 12g. Single wire for 8g and double wire; 10g. Flat versions for clamping wire into grooved wo....

Spare O rings for E-RAA1700/3 & E-RAA1700/3-2....

Airwheels. Aluminium hub thermoplastic rubber tyre.63mm 2.50" dia. airwheel. 3.2mm 10G Aluminium hub.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

Stanchion Height (excluding upper and lower locating pins): 20mm Base Locating Pin Length: 4mm Capping Locating Pin Length: 1mm Capping Locating Pin Diameter: 0.85mm Stanchion Diameter: 0.85mm Ba....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

Long SeriesMoulded in glass-filled nylon, motor easily fixed by self-tapping screws or nuts and bolts in pre-drilled holes. The face is grooved for nose leg.Size: 30/45....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

Brass tube with C/F nylon bearings. All have M2 threaded brass inserts. G/F nylon props, ideal for electrically powered boats.30mm 3 bladed propeller 6" (153mm) tube.....

Brass tube with C/F nylon bearings. All have M2 threaded brass inserts. G/F nylon props, ideal for electrically powered boats.40mm 3 bladed propeller 9" (229mm) tube.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

Moulded in glass-filled nylon, motor easily fixed by self-tapping screws or nuts and bolts in pre-drilled holes. The face is grooved for nose leg.Size: 45/61....

R/C Whip AerialA stainless steel aerial with nylon base mount, the coiled wire can be instantly dismantled for easy transportatio and together with a neat push-on connector for attaching the Rx wire ....

Sinlge insert for coupling - brass.....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model, ou....

A vertical support for chains and ropes aboard a vessel, the Stanchion is often installed to provide a lifeline and prevent people from falling overboard. Another finishing detail for any model....

Boat propellers, 'X' range available in M5 and M4 threads. Moulded in red nylon and black glass filled nylon. Complete with brass bush.55 x M5....

'X' range, available in M5 and M4 threads. Moulded in red nylon and black glass filled nylon.55 x M4....