Categories
Li-Po Batteries 1S (3.7V) (16)
Li-Po Batteries 2S (7.4V) (71)
Li-Po Batteries 3S (11.1V) (83)
Li-Po Batteries 4S (14.8V) (56)
Li-Po Batteries 5S (18.5V) (2)
Li-Po Batteries 6S (22.2V) (54)
Li-Po Batteries 12S (44.4V) (1)
Battery Checker (4)
Leads, Plugs and Wire (168)
Li-Fe Batteries (12)
LiHV Batteries (1)
LiIon Batteries (10)
Li-Po Batteries 7S (25.9V) (1)
Li-Po Jump Starter (12V) (2)
NiMH Batteries 4.8V (1)
NiMH Batteries 7.2V (7)
NiMH Batteries 8.4V (8)
SRP: £32.50
SMAP:
Trade: Barcode:
0605482124857
0605482124857
Product Details
The Spektrum Firma 5-Pole Rebuildable Brushed Motors offer an impressive low-cost upgrade for brushed esc equipped 1/10th scale Crawlers and Scalers. Featuring fully rebuildable design, impressive low-end torque and control, and excellent efficiency.
Key Features
- 5-pole design provides half the speed of 3-pole design counterparts
- Adjustable timing for clockwise and counterclockwise motor rotation
- 540 can size - perfect upgrade for most 1/10th scale
- Pre-shaped curved face brushes - No break-in period required!
- Wires and 3.5mm bullets installed - No soldering required!
In The Box
- (1) Spektrum Firma 5-Pole Rebuildable Brushed 20 Turn Motor
- (1) Product Manual
Needed to Complete
- (1) Brushed ESC 40 Amp or Higher
Next-level Slow Speed Control
The Spektrum Firma 5-Pole Rebuildable Brushed Motors offer an impressive low-cost upgrade for brushed esc equipped 1/10th scale Crawlers and Scalers. Featuring a fully rebuildable design, impressive low-end torque and control, and excellent efficiency.
Key Benefits
- 5–Pole design Maximizes smooth throttle control at low speeds and efficiency
- Fully Rebuildable Easy to replace parts for simple maintenance and increased motor lifespan
- Adjustable Timing: 0 to 20 degree timing adjustments for expert level tuning and increased performance
Features
- Available in 16T and 20T configurations
- 5-pole design provides half the speed of 3-pole design counterparts
- Adjustable timing for clockwise and counterclockwise motor rotation
- 540 can size – perfect upgrade for most 1/10th scale
- Pre-shaped curved face brushes – No break-in period required!
- Wires and 3.5mm bullets installed – No soldering required!
- Dual rubber sealed bearings
- Fully rebuildable with an easily accessible commutator and replaceable brushes, springs, and bearings
- 2S LiPo/6Cell NiMH recommended battery
Support
Related Items
Optional Parts
Used In