Flame-resistant wadding protects rocket recovery system. Contains 75 sheets - enough for around 18-25 flights. Required in most Estes model rockets.....

The new StarTech starters stay true to the design of the original, with one key addition. The small nichrome wire, the one that heats the propellant at launch, has been dipped in a specially crafted c....

Fully AssembledA must have for all rocketeers! And a great price too. The Estes Altimeter has a 4 digit LCD read out and displays in English or metric units. Accurately measures model rocket launch a....

At last! A brand new launch controller has arrived at Estes! Powered by 6 'C' alkaline batteries (not included), multiple power source options and 30 feet (9.1 m) of heavy duty cable makes this the ul....

This 18 in. (46 cm) parachute is preassembled and ready to use on model rockets that require a 18 in. (46 cm) parachute.....

This 12 in. (30.5 cm) parachute is preassembled and ready to use on model rockets that require a 12 in. parachute.....

Hooks fit mini motors (x1), regular and D size motors (x3) and E size motors (x2). Includes spacer for E motor hooks.....

Supplied complete with safety key and 9m (30ft) long cable. Requires 4 x AA Alkaline batteries (not included). You must be 18 years or older to launch rockets using E rocket motors.....

This 15 in. (38 cm) parachute is preassembled and ready to use on model rockets that require a 15 in. parachute. The perfect size when an 18 in. parachute is too big and a 12 in. parachute is too sma....

Use tube couplers to connect tubes of the same diameter. Two tubes per package. Use on kits that require a BT-80 body tube. Fits the NC-80b nose cone.....

Use tube couplers to connect tubes of the same diameter. Three tubes per package. Will fit nose cones NC-60.....

Supplied complete with safety key and 4.6m (15ft) long cable. Requires 4 x AA Alkaline batteries (not included).....

Fits BT-50, 55 and 60 body tubes. Can also be used to make a conversion for lightweight D motor powered rockets.....

Use tube couplers to connect tubes of the same diameter. Three tubes per package. Will fit the NC-55 nose cones.....

Contains two 3mm x 450mm and one 6mm x 910mm shock cords (enough for four shock cords). Includes mounts and instructions.....

Quick to build as there's no glue or tools required. Includes a 6mm launch rod and safety cap. Porta Pad E can accept a 5mm Maxi Launch Rod (D-ES2244) - not included. You must be 18 years or older to ....

24 in. (61 cm) nylon parachute designed for our bigger rockets, the Pro Series II. Made of high quality nylon to last!....

Use tube couplers to connect tubes of the same diameter. Three tubes per package. Works with the NC-50 nose cone.....

This 24 in. (61 cm) parachute is preassembled and ready to use on model rockets that require a 24 in. parachute.....

Replacement for launch rod included with Porta Pad II Launch Pad and suitable for the majority of Estes rockets.....

The Universal AstroCam quickly attaches to any rocket, ready to record launch from takeoff to landing. Record your launch to unveil detailed information about your rocket flight, capture stunning f....

This 9 in. (22.9 cm) parachute is preassembled and ready to use on model rockets that require a smaller parachute.....

This 6 in. (15.2 cm) parachute is preassembled and ready to use on model rockets that require a smaller parachute.....

The finest launch base to hit the market! Big and sturdy, this is the perfect launch base for the Pro Series II rockets and any other mid-powered rockets you have to launch! Breaks down for easy tran....

Contains eight 3mm, four 5mm and two 6mm launch lugs. Great for quick repairs!....

Ensures fast and accurate fin alignment for rockets with three or four fins.A great tool from days gone by. No more guessing where your wood fins go, this guide does it all for you. Easy to follow in....

Each package of nose cones contains five nose cones that will fit the BT-50 body tubes. All have eyelets or nose cone pins for shock cord and shroud line attachments.....

Measure rocket altitude with this easy to use device. Follow rocket in the sights to its apogee, then simply release Altitrak's trigger to lock the reading, simple!Use the NEW AltitrakT to instantly ....

Optional launch rod with extra strength for some of the larger Estes rockets.....

3 heavy duty elastic shock cords for your BIG rockets! Now available for purchase separately. An ideal shock cord for bigger rockets or a replacement should you have the shock cord break on any of yo....

30 in. (76 cm) nylon parachute designed for our biggest rockets, the Pro Series II. Made of high quality nylon to last!....

Quick to build as there's no glue or tools required. Includes a blast deflector plate, standoff, 3mm two-piece launch rod and safety cap. Can accommodate a 5mm Maxi Launch Rod (D-ES2244) - not include....

Need extra Starter Plugs? You've put them away and can't find them or you've lost them? Regardless of the reason, we've got you covered now! Included are 20 each of the yellow plugs for A8 and B4 stan....

Take learning to new heights with this low-cost technology solution for tracking model rocket altitude. These small, easy to transport altitude tracking devices allow for students to track flight data....

The easy way to accurately mark fin and launch lug placement lines. Also includes a fin gluing jig.....

A guide to help with the toughest of measurements.Works with all Estes Body tubes.....

The perfect accessory for all 29 mm engines! The Motor Retainer Set allows you to quickly load and unload a motor.....

The perfect accessory for all 24 mm engines! The Motor Retainer Set allows you to quickly load and unload a motor.....

A must have for the newly introduced Pro Series II E2X rockets. Boost your rocket altitude by 1000 feet (305 m). Easy to assemble and quickly attaches to your rocket.....

Adapts Estes 24 mm C11/D, Estes 24 mm E and Estes E30 series Composite engines to a 29 mm Estes casing size. 2 sets per package. Includes orange adapter tubes also.....

This engine set is a great alternative to the standard engine hook. Three complete sets included.....

Contains five of our most popular Sci-fi nose cones! Fits body tube sizes 50 and 55.....

Each package of nose cones contains four nose cones that will fit the BT-55 body tubes. All have eyelets for shock cord and shroud line attachments.....

Each package of nose cones contains four nose cones that will fit the BT-56 body tubes. All have eyelets for shock cord and shroud line attachments.....

Each package of nose cones contains four nose cones that will fit the BT-60 body tubes. All have eyelets for shock cord and shroud line attachments.....

Heavy duty motor mount for D and E size rocket motors. Fits BT-55, 60 and 80 body tubes.....

Display your rockets in style! Available in mini, standard and C11, D and E engine mount sizes.....

Display your rockets in style! Available in mini, standard and C11, D & E engine mount sizes.....

Four body tubes per package. Use tube couplers to connect tubes of the same diameter. Works with the NC-5 nose cone.....

Use tube couplers to connect tubes of the same diameter. Four tubes per package. Use with the NC-20 nose cone....

Heavy duty plastic guides slip easily onto your body and allows for precision cuts for specific lengths. 5 guide sets are included. BT5, BT20, BT50, BT55 and BT60. A must have for all rocket builders....

Each package contains five nose cones that will fit the BT-5 body tubes. All have eyelets for shock cord and shroud line attachments.....

Need extra Starter Plugs? You've put them away and can't find them or you've lost them? Regardless of the reason, we've got you covered now! Included are 20 each of the orange plugs for A3 mini engine....

Need extra Starter Plugs? You've put them away and can't find them or you've lost them? Regardless of the reason, we've got you covered now! Included are 20 each of the white plugs for D12 and 29 mm E....

As supplied with the Porta Pad II Launch Pad. Replaces that worn out deflector plate!....

Designed for use with the 2256 BT60 Booster accessory. Great for a replacement should you lose one.....

Designed for use with the 2257 BT55 Booster accessory. Great for a replacement should you lose one.....

Each package contains one nose cone with eyelet for shock cord and shroud line attachments.....

Each package of nose cones contains four nose cones for use with the BT-20 body tubes. All have eyelets for shock cord and shroud line attachments.....

Adapts D engine mounts to hold a standard engine. NOTE: This motor adapter has been tested in products that use ESTES metal engine hooks. It may not work with other brands of engine hooks.Rockets we....