Built around frequency-agile DSMR technology, the SR215 receiver delivers superb range and response, especially in noisy RF environments where a solid 2.4GHz link is crucial. Not only is the 2.4ghz link solid, this model also implements our lightning fast 5.5ms frame rate, providing a quicker , low-latency connection for the pro-level enthusiast. The SR215 also features a new, mo....

Built around frequency-agile DSMR technology, the SR515 receiver delivers superb range and response, especially in noisy RF environments where a solid 2.4GHz link is crucial. Not only is the 2.4ghz link solid, this model also implements our lightning fast 5.5ms frame rate, providing a quicker , low-latency connection for the pro-level enthusiast.The SR515 also features a new, mod....

Built around frequency-agile DSMR technology, the SR315 receiver delivers superb range and response, especially in noisy RF environments where a solid 2.4GHz link is crucial. Not only is the 2.4ghz link solid, this model also implements our lightning fast 5.5ms frame rate, providing a quicker , low-latency connection for the pro-level enthusiast.The SR315 also features a new, mode....

Key Features Battery checker with built in cell balancingAdvanced Servo testing feature helps with model setupSpektrum Smart battery technology allows users to take advantage of Smart Battery featuresEasy to read full colour displayQualcomm 3.0 compatible USB power port with Quick Charge for compatible Android and IOS devices (up to 12v and 2 amps)Update por....

66505 Eyebolt M2 BallØ :3.8mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 5.5mm, distance across eyebolt flats 2mm.Pack of 4.....

66508 Eyebolt M3 BallØ :5.5mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 7mm, distance across eyebolt flats 3mm.Pack of 4.....

The Spektrum™ Micro 4 charger is a 4-port tool for the RC pilot who wants the ultimate in 1S LiPo battery charging. Featuring Spektrum Smart Charging technology, its digital LED status screen delivers vital battery information in a clear manner the instant you connect. Its compact all-in-one design incredibly offers four independent charging channels, each with enough built-....

Features Small size and low weight makes it easy to take anywhere Six independent charge output ports can be used simultaneously Operates from a wall outlet or standard USB port Convenient voltage-check function Digital LED displays Port and Voltage information (6) Charging status lights (Red: Charging/Gr....

Needed To CompleteRobart ExtensionsOverviewIMPORTANT. Robart electric retracts use a non-standard plug and require the use of proprietary Robart extensions instead of standard servo extensions. Please use the part number links on this page to order the proper extensions. Note: the receiver and auxiliary battery inputs on the control board use standard servo plug....

 IntroductionThe original Timber® captured the thrill of incredible Short Takeoff and Landing (STOL) capabil....

66501 Eyebolt M1 BallØ :2mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1mm.Pack of 4.....

Key Features Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy Integrated Microchip Stores Unique Parameters for Each Battery IC3 and IC5 Connectors are Compatible with EC3 and EC5 Save Time and Hassle, while Improving Battery Life Smart Discharge Allows Batteries to Automatically Discharge to a Safe Voltage ....

66506 Eyebolt M2.5 BallØ :4.5mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 6.1mm, distance across eyebolt flats 2.5mm.Pack of 4.....

BR123 Cowl Ventilators (Resin) Ø 12, H20mm: 3D Resin Printed Cowl Ventilators, Base: Ø 10mm, Stem Ø 8mm, Height: 20mm, Vent Outer Ø 12mm, Vent Inner Ø 10.5mm.Pack of 2.....

66507 Eyebolt M2.5 BallØ :5mm Thread Length:14mm: Eyebolt height (excluding threaded fixing pin): 6.6mm, distance across eyebolt flats 2.5mm.Pack of 4.....

BR1119 Cowl Ventilators (Resin) Ø 18, H30mm: 3D Resin Printed Cowl Ventilators, Stem Ø 8mm, Height: 30mm, Vent Outer Ø 18mm, Vent Inner Ø 16.5mm.Pack of 2.....

66504 Eyebolt M1.6 BallØ :3mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 4.5mm, distance across eyebolt flats 1.6mm.Pack of 4.....

BR1201 Cowl Ventilators (Resin) Ø 10, H36mm, on long stem: 3D Resin Printed Cowl Ventilators, Stem Ø 6.5mm, Height: 36mm, Vent Outer Ø 10mm, Vent Inner Ø 8.7mm.Pack of 2.....

BR1968 Cowl Ventilators (Resin) Ø 29, H40mm: 3D Resin Printed Cowl Ventilators, Stem Ø 12.5mm, Height: 40mm, Vent Outer Ø 29mm, Vent Inner Ø 26mm.Pack of 2.....

BR55 Cowl Ventilators (Resin) Ø 23, H35mm: 3D Resin Printed Cowl Ventilators, Stem Ø 12mm, Height: 35mm, Vent Outer Ø 23mm, Vent Inner Ø 21mm.Pack of 2.....

62033 Angled Flagstaff Complete (Brass): 62032 base complete with a turned brass flagstaff and separate turned brass flagstaff cap.The brass flagstaff tapers from Ø 3mm to Ø 1.5mm and the separate brass cap allows the flagstaff to be trimmed allowing flagstaff lengths from 100mm down to 50mm.Pack of 2.....

62109 Ships Horn Ø :7mm L:22.5mm: Bell tapers from Ø 7 to 2.1mm along 16.9mm length.Diaphragm chamber Ø 5.2mm length 5.6mm.Overall height (excluding fixing pin): 8.6mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....

62102 Ships Horn Ø :5mm L:12mm: Bell tapers from Ø 5 to 1.5mm along 8mm length.Diaphragm chamber Ø 3.7mm length 4mm.Overall height (excluding fixing pin): 5.8mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....

62034 Angled Flagstaff Complete (Brass & Wood): 62032 base complete with a turned brass flagstaff cap and Ø 3mm dowel flagstaff.The 100mm dowel flagstaff can be shaped and stained to match any model before being capped with the separate brass cap.Pack of 2.....

66503 Eyebolt M1.4 BallØ :2.6mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3.4mm, distance across eyebolt flats 1.4mm.Pack of 4.....

BR32 Stag Horn Bollard L15, H8: 3D Resin Printed Staghorn Bollard, Base: 15x6mm, Height: 8mm.Pack of 2.....

BR34 Cowl Ventilators (Resin) Ø 7, H28mm, on long stem: 3D Resin Printed Cowl Ventilators, Base: Ø 4mm, Stem Ø 3mm, Height: 28mm, Vent Outer Ø 7mm, Vent Inner Ø 5.5mm.Pack of 2.....

BR158 Cowl Ventilators (Resin) Ø 7.5, H18mm: 3D Resin Printed Cowl Ventilators, Base: Ø 5mm, Stem Ø 3mm, Height: 18mm, Vent Outer Ø 7.5mm, Vent Inner Ø 6.5mm.Pack of 2.....

BR558 Cowl Ventilators (Resin) Ø 37, H45mm, with fabricating detail: 3D Resin Printed Cowl Ventilators, Stem Ø 16mm, Height: 45mm, Vent Outer Width 32.5mm, Outer Height 34mm, Vent Inner Width 31.3mm Vent Inner Height 32.8mm.Pack of 2.....

BR559 Bollard (Straight Webbed) L40 H19: 3D Resin Printed Bollard, Base: 40x14.5mm, Height: 19mm, Post Ø 6mm.Pack of 2.....

BR560 Bollard (Angled Webbed) L40 H19: 3D Resin Printed Bollard, Base: 40x14.5mm, Height: 19mm, Post Ø 6mm, Post Angle 10deg Past Vertical.Pack of 2.....

Key FeaturesOffers extra protection for you, your equipment and your charging locationExplosion and flame resistantHook and Loop flap will release pressure in the event of an explosionDimensions: 8.5" x 7"OverviewDynamite's Li-Po charge protection bags provide peace of mind knowing that you, your equipment, and your batteries are protected in case of an acc....

62028 Flush Flagstaff Base: Base Ø 8mm, Hole Ø 2mm, Height (excluding fixing pin): 2mm, Fixing Pin Ø 3.2mm, Fixing Pin Length 4mm.Pack of 2.....

66502 Eyebolt M1.2 BallØ :2.3mm Thread Length:12mm: Eyebolt height (excluding threaded fixing pin): 3mm, distance across eyebolt flats 1.2mm.Pack of 4.....

62029 Flush Flagstaff Complete (Brass): 62028 base complete with a turned brass flagstaff and separate turned brass flagstaff cap.The brass flagstaff tapers from Ø 3mm to Ø 1.5mm and the separate brass cap allows the flagstaff to be trimmed allowing flagstaff lengths from 100mm down to 50mm.Pack of 2.....

BR532 Cowl Ventilators (Resin) Ø 20, H32mm: 3D Resin Printed Cowl Ventilators, Stem Ø 9.5mm, Height: 32mm, Vent Outer Ø 20mm, Vent Inner Ø 17.5mm.Pack of 2.....

62101 Ships Horn Ø :3.5mm L:11mm: Bell tapers from Ø 3.5 to 1mm along 8.2mm length.Diaphragm chamber Ø 2.6mm length 2.8mm.Overall height (excluding fixing pin): 4.2mm, Fixing Pin Ø 1mm, Fixing Pin Length 2mm.Pack of 2.....

62103 Ships Horn Ø :5mm L:15mm: Bell tapers from Ø 5 to 1.5mm along 11mm length.Diaphragm chamber Ø 3.7mm length 4mm.Overall height (excluding fixing pin): 5.8mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....

62104 Ships Horn Ø :5.5mm L:14mm: Bell tapers from Ø 5.5 to 1.65mm along 9.6mm length.Diaphragm chamber Ø 4.1mm length 4.4mm.Overall height (excluding fixing pin): 6.4mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....

62105 Ships Horn Ø :5.5mm L:17.5mm: Bell tapers from Ø 5.5 to 1.65mm along 13.1mm length.Diaphragm chamber Ø 4.1mm length 4.4mm.Overall height (excluding fixing pin): 6.4mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....

62106 Ships Horn Ø :6mm L:16mm: Bell tapers from Ø 6 to 1.8mm along 11.2mm length.Diaphragm chamber Ø 4.4mm length 4.8mm.Overall height (excluding fixing pin): 6.8mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....

62107 Ships Horn Ø :6mm L:20mm: Bell tapers from Ø 6 to 1.8mm along 15.2mm length.Diaphragm chamber Ø 4.4mm length 4.8mm.Overall height (excluding fixing pin): 6.8mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....

62108 Ships Horn Ø :7mm L:18mm: Bell tapers from Ø 7 to 2.1mm along 12.4mm length.Diaphragm chamber Ø 5.2mm length 5.6mm.Overall height (excluding fixing pin): 8.6mm, Fixing Pin Ø 1mm, Fixing Pin Length 2.5mm.Pack of 2.....

62100 Ships Horn Ø :3.5mm L:9mm: Bell tapers from Ø 3.5 to 1mm along 6.2mm length.Diaphragm chamber Ø 2.6mm length 2.8mm.Overall height (excluding fixing pin): 4.2mm, Fixing Pin Ø 1mm, Fixing Pin Length 2mm.Pack of 2.....

62030 Flush Flagstaff Complete (Brass & Wood): 62028 base complete with a turned brass flagstaff cap and Ø 3mm dowel flagstaff.The 100mm dowel flagstaff can be shaped and stained to match any model before being capped with the separate brass cap.Pack of 2.....

62032 Angled Flagstaff Base: Angled to give a gently sloping flagstaff.Base Ø 10mm, Stem Ø 3.2mm, Hole Ø 2mm, Height (excluding fixing pin): 10mm, Fixing Pin Ø 2mm, Fixing Pin Length 4mm.Pack of 2.....

BR590 Fairlead Open (double vertical rollers) L35, W6, H7: 3D Resin Printed Bollard, Base: 35x6mm, Height: 7mm, Roller Ø 4mm.Pack of 2.....

62020 Vertical Flagstaff Base: Base Ø 10mm, Stem Ø 3.2mm, Hole Ø 2mm, Height (excluding fixing pin): 10mm, Fixing Pin Ø 2mm, Fixing Pin Length 4mm.Pack of 2.....

62021 Vertical Flagstaff Complete (Brass): 62020 base complete with a turned brass flagstaff and separate turned brass flagstaff cap.The brass flagstaff tapers from Ø 3mm to Ø 1.5mm and the separate brass cap allows the flagstaff to be trimmed allowing flagstaff lengths from 100mm down to 50mm.Pack of 2.....

62022 Vertical Flagstaff Complete (Brass & Wood): 62020 base complete with a turned brass flagstaff cap and Ø 3mm dowel flagstaff.The 100mm dowel flagstaff can be shaped and stained to match any model before being capped with the separate brass cap.Pack of 2.....

62024 Profiled Flagstaff Base: Base Ø 7 to 3.2mm, Hole Ø 2mm, Height (excluding fixing pin): 7mm, Fixing Pin Ø 2mm, Fixing Pin Length 4mm.Pack of 2.....

62025 Profiled Flagstaff Complete (Brass): 62024 base complete with a turned brass flagstaff and separate turned brass flagstaff cap.The brass flagstaff tapers from Ø 3mm to Ø 1.5mm and the separate brass cap allows the flagstaff to be trimmed allowing flagstaff lengths from 100mm down to 50mm.Pack of 2.....

62026 Profiled Flagstaff Complete (Brass & Wood): 62024 base complete with a turned brass flagstaff cap and Ø 3mm dowel flagstaff.The 100mm dowel flagstaff can be shaped and stained to match any model before being capped with the separate brass cap.Pack of 2.....

BR5123 Cowl Ventilators (Resin) Ø 12, H27mm: 3D Resin Printed Cowl Ventilators, Base: Ø 10mm, Stem Ø 8mm, Height: 27mm, Vent Outer Ø 12mm, Vent Inner Ø 10.5mm.Pack of 2.....