OverviewInput Voltage 3 – 5.5 volts Do not exceed 5.5 volts this will damage your controller LED Lights – Up to 16 E-flite Universal light Kit LEDs can be used on one controller On – Off can be operated by a channel on your receiver On – Off occurs at approximately middle stick positionOn at > 1.5ms - Off at < 1.5ms Average Current Load 6....

Key Features Plugs directly into the receiver using standard servo connectors Connect and control multiple mechanisms with a single radio channel One-by-one and programmed delay modes Electronic and manual release mechanisms Ready to use and easy to install Overview The E-flite servoless payload release enables you to drop a single pay....

Overview Specifications: Length/Diameter: 5 in (127mm) Pitch: 2.75 in (69m) Inner Diameter Hole: 0.157 (4mm) Material: Black Composite ....

Key Features 1.375 inches (1-3/8") from Mount to tip of shaft 8-32 internal thread 8 x 1.25 external thread....

Key Features Attaches to factory-installed mounts in the UMX™ Carbon Cub SS (EFLU1180) Floatplane option takes only minutes to complete Painted with authentic scale appeal Mounting hardware included with pre-bent wire struts Lightweight design with efficient hull shapeOverviewThe UMX™ Carbon Cub SS float set is a great option that adds even mo....

This is required to mount the Carbon-Z Float set (EFLA5600) to the Carbon-Z Cessna 150 (EFL1450/EFL1475)....

<p>This is required to mount the Carbon-Z Float set (EFLA5600) to the Carbon-Z Cub (EFL10450/EFL10475)</p>....

Key FeaturesRobust landing gear strut and mounting bracketIntegrated electric motor with a micro PCBBuilt-in overcurrent protectionStrut Diameter: 0.137 in (3.5mm)Aircraft Weight: 4.00 - 7.00 lb (1.80 - 3.10kg)OverviewAdd the realism of functioning retracts to your 15- to 25-sized airplanes. E-flite's completely self-contained retract systems require no air ta....

Key FeaturesMain Gear Strut diameter: 4mmNose Gear Strut diameter: 4mmDetailed Information25-46 Size Main Retract Units (mm) 25-46 Size Nose Gear Unit (mm)....

Key FeaturesIdeal for scale airplanes equipped with a 50-60cc gas engine or equivalentAllows the operation and sequencing of retracts and gear doors with a single receiver channelElectronic control box offers sequence option and auxiliary powerIncluded programming unit features an LCD display and remote functionalityCNC machined, aluminum offset oleo struts delivers an....

Key FeaturesStrut diameter: 4mmDetailed Information25-46 Size Main Retract Units (mm)....

Key FeaturesAll-aluminum CNC-machined retract unitIntegrated electric motor with a micro PCB eliminating the need for a retract servoBrass wheel collars and fully-bushed brass pivot points for smooth, trouble-free operationBuilt-in over-current protectionScale-appearance 100-degree retraction sweep and 90-degree rotationChrome-plated landing gear strutRecommended f....

OverviewThis product is not intended for use by children under 14 years of age without direct adult supervision.Detailed Information25-46 Size Nose Gear Unit (mm) ....

Detailed Information60-120 Size Nose Gear Unit (mm)....

Detailed Information25-46 Size Main Retract Units (mm)....

Key Features Robust landing gear strut and mounting bracket Integrated electric motor with a micro PCB Built-in over-current protection Aircraft weight: 2.00-4.50 lb (0.90-2.00 kg) Strut diameter 0.118 in (3mm) Strut length 0.866 in (22mm)Video Overview OverviewYou don’t have to be a master modeler to add the realism....

Detailed Information15-25 Size Main Retract Units (mm)....

Detailed Information15-25 Size Nose Gear Unit (mm) ....

Detailed Information15-25 Size Nose Gear Unit (mm) ....

Video OverviewDetailed Information10-15 Size Main Retract Units (mm)....

Video OverviewDetailed Information10-15 Size Nose Gear Unit (mm)....