Flame-resistant wadding protects rocket recovery system. Contains 75 sheets - enough for around 18-25 flights. Required in most Estes model rockets.....

The new StarTech starters stay true to the design of the original, with one key addition. The small nichrome wire, the one that heats the propellant at launch, has been dipped in a specially crafted chemical compound that reacts with the heat of the wire to create a large burst of heat and pressure that ensures ignition. Never misfire again! Includes 6 starters. 60 years ago, V....

Fully AssembledA must have for all rocketeers! And a great price too. The Estes Altimeter has a 4 digit LCD read out and displays in English or metric units. Accurately measures model rocket launch altitudes from 0 - 9999 feet (0 - 3000 m) and can store up to 10 consecutive flights! Includes replaceable alkaline battery.....

The perfect accessory for all 29 mm engines! The Motor Retainer Set allows you to quickly load and unload a motor.....

The perfect accessory for all 24 mm engines! The Motor Retainer Set allows you to quickly load and unload a motor.....

Use tube couplers to connect tubes of the same diameter. Four tubes per package. Use with the NC-20 nose cone....

24 in. (61 cm) nylon parachute designed for our bigger rockets, the Pro Series II. Made of high quality nylon to last!....

Heavy duty motor mount for D and E size rocket motors. Fits BT-55, 60 and 80 body tubes.....

Quick to build as there's no glue or tools required. Includes a 6mm launch rod and safety cap. Porta Pad E can accept a 5mm Maxi Launch Rod (D-ES2244) - not included. You must be 18 years or older to launch rockets using E rocket motors.Launch the big boys with the Estes⌐ Porta-Pad⌐ E Launch Pad. The Porta-Pad⌐ E Launch Pad assembles quickly and easily, with no gluing required. T....

At last! A brand new launch controller has arrived at Estes! Powered by 6 'C' alkaline batteries (not included), multiple power source options and 30 feet (9.1 m) of heavy duty cable makes this the ultimate launch controller for launching the new Pro Series II line of rockets as well as other mid engine power rockets! ....

This engine set is a great alternative to the standard engine hook. Three complete sets included.....

Supplied complete with safety key and 4.6m (15ft) long cable. Requires 4 x AA Alkaline batteries (not included).....

Each package of nose cones contains five nose cones that will fit the BT-50 body tubes. All have eyelets or nose cone pins for shock cord and shroud line attachments.....

Adapts Estes 24 mm C11/D, Estes 24 mm E and Estes E30 series Composite engines to a 29 mm Estes casing size. 2 sets per package. Includes orange adapter tubes also.....

Supplied complete with safety key and 9m (30ft) long cable. Requires 4 x AA Alkaline batteries (not included). You must be 18 years or older to launch rockets using E rocket motors.....

The finest launch base to hit the market! Big and sturdy, this is the perfect launch base for the Pro Series II rockets and any other mid-powered rockets you have to launch! Breaks down for easy transportation to and from the launch site. Legs are removable and launch rod comes in two pieces.....

Quick to build as there's no glue or tools required. Includes a blast deflector plate, standoff, 3mm two-piece launch rod and safety cap. Can accommodate a 5mm Maxi Launch Rod (D-ES2244) - not included.....

Ensures fast and accurate fin alignment for rockets with three or four fins.A great tool from days gone by. No more guessing where your wood fins go, this guide does it all for you. Easy to follow instructions are included. No more door frames needed to draw that straight line for fin placement. Works with 3/32" (2 mm) or 1/8" (3 mm) wood. (Body tubes and wood not included.)....

Replacement for launch rod included with Porta Pad II Launch Pad and suitable for the majority of Estes rockets.....

Optional launch rod with extra strength for some of the larger Estes rockets.....

Measure rocket altitude with this easy to use device. Follow rocket in the sights to its apogee, then simply release Altitrak's trigger to lock the reading, simple!Use the NEW AltitrakT to instantly tell how high a rocket flies! Fully assembled and ready to use right out of the package, the AltitrakT measures altitudes as high as 1,300 feet. Simply aim AltitrakT at the rocket befo....

The easy way to accurately mark fin and launch lug placement lines. Also includes a fin gluing jig.....

A guide to help with the toughest of measurements.Works with all Estes Body tubes.....

Take learning to new heights with this low-cost technology solution for tracking model rocket altitude. These small, easy to transport altitude tracking devices allow for students to track flight data, analyze and graph! Coming in a 3 pack, this makes it easier on your wallet so you can provide engaging learning opportunities for your students. ....

Each package of nose cones contains four nose cones that will fit the BT-56 body tubes. All have eyelets for shock cord and shroud line attachments.....

Contains five of our most popular Sci-fi nose cones! Fits body tube sizes 50 and 55.....

Heavy duty plastic guides slip easily onto your body and allows for precision cuts for specific lengths. 5 guide sets are included. BT5, BT20, BT50, BT55 and BT60. A must have for all rocket builders! You won't find an easier way to shorten that body tube!....

Display your rockets in style! Available in mini, standard and C11, D & E engine mount sizes.....

Adapts D engine mounts to hold a standard engine. NOTE: This motor adapter has been tested in products that use ESTES metal engine hooks. It may not work with other brands of engine hooks.Rockets weighing up to 4 ounces that would normally fly on C11 or D12 engines can be flown on B and C engines.....

As supplied with the Porta Pad II Launch Pad. Replaces that worn out deflector plate!....

Need extra Starter Plugs? You've put them away and can't find them or you've lost them? Regardless of the reason, we've got you covered now! Included are 20 each of the orange plugs for A3 mini engines and green plugs for A10 mini engines. ....

Designed for use with the 2256 BT60 Booster accessory. Great for a replacement should you lose one.....

Designed for use with the 2257 BT55 Booster accessory. Great for a replacement should you lose one.....