Categories
Li-Po Batteries 1S (3.7V) (16)
Li-Po Batteries 2S (7.4V) (71)
Li-Po Batteries 3S (11.1V) (83)
Li-Po Batteries 4S (14.8V) (56)
Li-Po Batteries 5S (18.5V) (2)
Li-Po Batteries 6S (22.2V) (54)
Li-Po Batteries 12S (44.4V) (1)
Battery Checker (4)
Leads, Plugs and Wire (168)
Li-Fe Batteries (12)
LiHV Batteries (1)
LiIon Batteries (10)
Li-Po Batteries 7S (25.9V) (1)
Li-Po Jump Starter (12V) (2)
NiMH Batteries 4.8V (1)
NiMH Batteries 7.2V (7)
NiMH Batteries 8.4V (8)
SRP: £59.99
SMAP:
Trade: Barcode:
0605482079164
0605482079164
Key Features
- Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
- 3.5A continuous current, 5V Switch-Mode BEC Circuit
- Stronger BEC for support of most 3-axis stabilization systems
- Drive up to 7 analog or 6 digital standard-size servos with the BEC
- 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
- Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing - 5 user-selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads
Overview
The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.
Support
Related Items
Optional Parts