Product Overview

The RC Overhaul swivel car stand make routine (or unexpected) maintenance easier by getting all wheels of the work surface as well as being able to swivel the car through 360 degrees; allowing you to work on all 4 corners with ease!

The height of the stand can be adjusted by rotating the upper plate counter clockwise a few turns, raising the upper plate; conversely is can be rotated clockwise to lower it making it more stable for vehicles with less droop. The upper plate can be fixed in one position if you wish by tightening the small grub screw on the centre column preventing your vehicle from spinning round when you don't want it to. The upper plate features 4 x 12mm and 16mm holes allowing for a range of shocks to fit in whilst you rebuild them ensuring your shocks don't fall over whilst you re-fil them with oil. A magnetic strip is provided with the stand for your screws and accessories so you know exactly where 'that' screw is when rebuilding your vehicle. On the flip side to the magnetic strip is a laser etched ruler along the front edge allowing you to measure screws or material.

Made from folded aluminium and with a chucky centre column it makes for a sturdy stand that will happily hold your 1/18th scale GROM or your 1/8th TLR buggy! Foam pads are provided for the upper plate that helps to grip the car when working on it and prevents it slipping off; whilst 4 smaller pads are included for the bottom of the base to prevent the stand slipping on any hard surface. Anodized black and finished off with the 'RC Overhaul' logo laser etched on the base, this swivel car stand make working on your vehicle that little bit easier!